|
Post by jackinabox91 on Apr 8, 2008 16:33:14 GMT -5
ok heres what i want to do... i want to take the stock from this agm l96 airsoft gun and put the guts of a paintball gun "preferably an ion or a5" and make a true sniper rifle. if be possible i would like to make it a bolt action but if that is going to be too harh i wont worry about it, but i was just wondering what you would do if you were making this mod. note: i would like to make it so that people what pretty much have to ask if it was real or just a paintball gun. ;D heres the pics of the gun www.airsplat.com/Images/AR-XD-AWP-002.jpg
|
|
|
Post by Hammy on Apr 8, 2008 21:37:38 GMT -5
I would say maybe clip fed. It wouldn't have to be like the Tacs but maybe a clip like on some sniper riffles to get rid of any kind of a hopper OR you could always use a 10 round loader like on pumps for a hopper.
|
|
|
Post by jackinabox91 on Apr 15, 2008 16:15:16 GMT -5
so exactly what kind of gun should i put in the stock, and how could i possibly make it a bolt action... need all the help i can get!!!!
|
|
|
Post by dopey on May 9, 2008 16:42:21 GMT -5
an ion would be easier to work with and is more efficient with air. however it would be difficult if not immpossible to make it a bolt ation because it is an electric gun and it cocks itself once you connect your air. an a5 would be more complicated to work with because it has more parts. but the a5 it is possible to make it a bolt action and would be more reliable than an ion excepte that it would use more air. it would also be awkward because the charging handle for the a5 is on the left side of the gun. as far as a loader goes idk what to use maybe some sort of spring fed clip?
|
|